The clever people at Husqvarna Viking have created over 50 specialised accessory feet to make your sewing applications easier (and they are always creating more!). Here are three feet from my accessory box that I use regularly when I am garment making.
1. Invisible zip foot
First out of the box is my Clear Invisible Zip Foot (there is a metal version if you prefer to use metal feet). An invisible zip, sometimes known as a concealed zip, is stitched into a seam and as the name implies it’s almost invisible – once it’s inserted all you should be able to see is the zip pull.
Zip application is often thought of as very difficult to do but it`s really one of the easiest, especially when sewn with the Clear Invisible Zip Foot. An invisible zip is always inserted before stitching the garment’s seam. It has two grooves underneath the foot to accommodate the zip coils and hold them in place as you stitch. You need to buy a zip that is at least 1 1/4″ (3 cm) longer than the zip opening.
If you haven’t inserted an invisible zip before then don’t worry, I go through the process step by step in the video below!
2. Seam guide foot
Next out of my box is the Clear Seam Guide Foot. As it says in the name, it’s a clear foot so has lots of visibility when joining fabric and stitching seams. The Clear Seam Guide Foot has a metal guide, which is set at 5/8” (1.5cm) from the centre needle position; this is the standard seam allowance on most patterns. So when you are constructing a garment all you need to do is place the edge of the fabric on the guide and you’ll get an accurate seam allowance every time. To allow for varying seam allowances there are also markings on the foot set at 1/4”, 3/8” and 1/2”.
If you are an Epic 2 owner there is an IDF version of the Clear Seam Guide Foot so that you can use it with the Integrated Dual Feed.
3. Edge joining foot
Last out of my accessory box is the Clear B Edge Joining Foot, which is one of my favourites as it can be used for so many applications. It also comes as a metal foot but I personally prefer the clear one as it gives lots of visibility. As it’s a joining foot then you can use it for tasks such as joining fabric and lace, or for embellishing ribbon with decorative stitches. However, I generally use it for topstitching as you can put the guide on the edge of the fabric and move the needle across to get a really close topstitch – great for garments but also useful for things like bag handles. It’s also good for top stitching around T-shirt necklines – the guide sits in the seam line and then you can position the needle for top stitching.
If you are an Epic 2 owner there is an IDF version of the Edge Joining Foot so that you can use it with the Integrated Dual Feed.
So those are my top three additional feet for garment making. We have a special offer on these feet at the moment – you can buy them as a bundle and save 10%! This offer is only available online so make sure you get it while you can!
I hope you have enjoyed this little tour of my sewing accessory box, I do have lots of other feet so be sure to pop back to our Blog and I’ll tell you about some more of my accessory feet!